Brushless Centrifugal Circulation Electric Water Heater Pump for Shower Φ Advanced magnetic driving technology for static-seal, without any leakage forever Φ Imported Japan XYRON PPE material, certified by WARS. (customized functions) 1. PWM, 0~5V speed control, 2. Submersible 3. Solar panel driven directly 4. FG (RPM) signal wire  The technical parameters above are only for your reference. For more details, please feel free to Contact Us. Ethylene Decomposition Furnace Anchor There are many types of anchors, and high-holding anchors are commonly used on drilling platforms, as shown in Figure 1. The main feature of this anchor is that its gripping force can only be guaranteed when the pulling force is in the horizontal direction. If the pulling force has a vertical component, the gripping force is reduced, and the anchor claw will be pulled out of the ground. Experiments show that the grip force starts to decrease when the anchor handle is turned up by 6°, and the grip force decreases significantly when the anchor handle is turned up by 12°. Therefore, when mooring, the lower end of the anchor chain must be tangent to the seabed, otherwise there is a danger of running the anchor. Lifting the anchor is to use this feature, pull the anchor chain upward to lift the anchor handle, the anchor loses its grip, and finally breaks out of the ground. Ethylene Decomposition Furnace Anchor,Refractory Casting Anchors,Anchors For Pre Heater,304 Stainless Steel Refractory Anchor Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.com
Φ Heavy duty work, can sustain continuous 24-hour work
Φ High efficiency ECM brushless DC motor with long lifetime of 20,000 hours
Φ 3-phase motor for lower power consumption and reduced heat generation
Φ Durable permanent magnetic rotor/impeller and fine ceramic shaft
Φ Specialized closed-type impeller to minimize water loss and improve efficiency
Φ High precision one-time injection magnetic rotor for stable and low vibration operation
Φ High temperature materials suitable for liquid temperatures up to 90°C
Φ Low or no maintenance
Φ Food grade materials
Specification
Max Flow Rate
18L/MIN 22L/MIN
Max Static Lift
8M ,11M
Rated Voltage
12V / 24V
Impeller Type
Open impeller
Motor Type
Three-phase brushless DC motor
Food Grade(Y/N)
Y
Liquid Temperature
0-100°C
Pump Theory
Centrifugal pump
Ambient Temperature
-10-50°C
Media
Pure Water
Waterproof Class
IP42
Use Place
Indoor or Outdoor
Working Voltage Range
6~16V or 12~28V
Power Consumption
34W, 48W
Noise Level from 1M
42dB / Max
Ideal Life Time
20,000 Hours
Working Mode
Continuous
OD of Inlet
21 mm
OD of Outlet
11.5mm
Dimension
89.3x60.34x57.92 mm
Power Supply
DC power supply, battery, solar powered
Flow Rate Regulation
Remarks
Can't dry-run, not self-priming
1. Liquid transfer general purpose pumping
2. Hot water circulating system
3. Electronics cooling water circulation chiller systems
4. Liquid filling and transfer in food, beverage processing, vending machines
5. Instant electric water heater, electric shower.
6. Circulating systems for homes, RVs, and boats
7. Cleaning equipment, purification, and water treatment
8. Irrigation solar pump, swimming pool circulation
9. Electric cars: radiators, heaters
10. Automotive air conditioning
11. Computer CPU cooling circulation
12. Water heating mattress
Brushless Centrifugal Circulation Electric Water Heater Pump for Shower
Model NO.: TL-C01
Theory: Centrifugal Pump
Liquid: Hot or Cold Water, Beverage, Oil, etc.
Motor: DC Brushless Motor, 3-Phase Motor
Temperature Range: 0~100°C
Long Lifetime: 20,000 hours
Materials: Food Grade Materials, Imported Japan Xyron PPE
Trademark: TOPSFLO
Transport Package: Standard Export Packing or OEM Packing
Specification: CE, IEC, RoHS
Origin: China
HS Code: 84135020