shutter door roll forming machine  description  Â
Spare parts we bring for you free
1.button, two        2. switch, one   3. relay, one  4. Travel switch: two Â
5. Contactor: one      6. machine paint: one small box
7. Encoder:one       8. Machine install and operation manual: one
shutter door roll forming machine main parameters
| Productivity Ma | shutter as the drawing |
| Materials specification | Aluminum, galvalume, galvanized and pre-painted galvanized steel. |
| Thickness | 0.5 mm to 1.0mm.   |
| Main motor power | 4.5 kw.  |
| Hydraulic station power | 3 kw.  |
| Feeding width | Depends on the model of profile.   |
| Yield stress | 235Mpa(33KSI) ~ 350Mpa   |
| Roll forming speed | 12-15 m/minute.   |
| Cutting tolerance | +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm |
| Manual Uncoiler | Max. Capacity: 3000kgs   Manual Uncoiler |
| Coil inner diameter | 508mm/610mm.  |
| Voltage | 380v/50hz/3 phase    |
| Numbers of stands | 12 stands/stations/pairs for each roll forming system |
| Roller Material | High grade No.45 forged steel, coated with hard chrome. |
| Active Shaft Material | High grade No.45 carbon wrought steel,which can improve the integrated mechanic feature of the shaft. |
| Electric Elements |
PLC control panel, transducer imported from Mitsubishi of Japan. Other elements are from famous suppliers of China |
| Cutter blades | Cr12 mould steel with quenched treatment. |
Our Services
 1.We provide the technical support for whole life.
   Meanwhile, if any parts go broken and not artificial damage, we will send you new ones for free.Â
2.When need the technician to go abroad, we will arrange the technician.
   But the buyer should take all the cost, including Visa, Roundtrip ticket,
   suitable accommodation and pay the service fee to the technician with $100/days
FAQ
Contact details
| Tianjin Haixing Industrial Group Co.,Ltd | |
| Website | www.roll-forming-machine-china.com |
| Mob | 008618920411229 |
| Â | Â |
| Â | Â |
| Contact person | Alice Jiang |
| Main products | Roof roll forming machine; Glazed tile roll forming machine; Gutter roll forming machine; rain pipe roll forming machine; Floor decking roll forming machine; CZ purlin roll forming machine; Shutter door roll forming machine; Door frame roll forming machine; Container sheet roll forming machine; corrugated sheet machine; Hydraulic decoiler; Double layer roll forming machine; Crimping machine; Curve machine; Sandwich panel production line; Trapezoidal roof sheet machine... |
Â
In the silicone industry, to meet the user experience of the majority of consumers, multi-color products have always been the best-selling products, the process is used in silicon materials bonding and plastic bonding.
1. Soft and hard plastic two-color design
The two materials must have a certain temperature difference in the melting point. Generally, it is recommended to reach 60°. It is recommended to be at least 30°. The melting temperature of the first shot material is high. Generally, the first shot is PC or PC/ABS, and the second shot is TPU or TPE, PC thickness is 0.6-0.7mm, soft rubber part thickness is required to be 0.4mm or more.
Try to widen the contact area, make grooves to increase the adhesion, or use the core for the first shot, and the second part of the material is injected into the first shot. The surface of the first shot is as rough as possible.
2. Material compatibility
Multi-color injection molded mating materials must meet two basic compatibility conditions. They are compatible with the adhesive compatibility and processing.
3. Transparent and non-transparent two-shot design
(1) Double shot design of small lenses
The first shot is non-transparent, and the second shot is made of a lens. The first shot uses a PC with a high melting point and the second shot uses a PMMA.
(2) Transparent and non-transparent bijective design for decoration
The first shot is a non-transparent material, the second shot is a transparent material, and the non-transparent material is generally a high temperature of the PC material of SABIC, and the second shot transparent material is PMMA or PC. The PC needs to be sprayed with UV to protect it. PMMA can choose uv or fortification. If there are characters on the surface, you must choose UV
In the silicon bonding area, several silicon materials will be used to achieve different color silicon, different rubber components, so the multi_k color process is commonly used and is quite popular.
Multi Color Molding,Multi Colour Injection Moulding,Multi Color Injection Molding,Multicolor Injection Molding
Suzhou FCE precision electronics Co., LTD , https://www.fcesz.com