The reflection method of the aerial work belt is very simple. First, introspect the tension of the belt. At this time, you can use the thumb to strongly press the belt between the two pulleys. The pressing force is about 10 kg. Assuming that the belt is about 10 mm in depression, it is considered that the belt tension is suitable for knocking. Assuming that the amount of reduction is excessive, the tension of the belt is considered to be insufficient. Assuming that there is almost no reduction in the belt tension, the tension of the belt is considered excessive. In the absence of tension, the belt is slippery. When the tension is too large, it is very easy to damage the bearings of various auxiliary machines. For this purpose, the relevant adjusting nuts or bolts should be loosened and the tension of the belt should be adjusted to the optimum shape.
In addition, maintenance of the aerial vehicle must also pay attention to the wear of the belt. Old belts are worn out and the contact area between belts and pulleys is drastically reduced. At this time, just press the belt with force and the belt sinks deep into the groove of the pulley. The belt rubber also has an aging problem. If the belt rubber is seriously aged, it must be changed in time.
The high-altitude vehicle engine is the head of the aerial vehicle. If the engine is bad, it means that a high-altitude vehicle is useless. Every day a high-altitude aerial vehicle runs on the road, if it takes a long time, it may cause the engine belt to wear out or deteriorate. Therefore, the vehicle owner usually starts to inspect the belt for a while to avoid unnecessary troubles.
HAE UV Inkjet Coding Machine UV inkjet system adopt industrial piezoelectric drop-on-demand inkjet technology to carry out a revolutionary innovation on the original personalized card production process in the card industry, whether it is production speed, printing quality, production cost or The scratch resistance of the product has been greatly improved.
Online UV Ink inkjet printer Mainly for labels of various materials, variable information such as Chinese characters, letters, numbers, one-dimensional bar codes, two-dimensional bar codes, etc. can be sprayed on the label and roll film. The printed content has a bright and shiny appearance, which improves the value of the label. When producing standard labels, the speed is 90 meters per minute, UV ink inkjet coder can be installed on various packaging lines, printing lines, rewinders, and slitting machines.
Aiming at the printing material, customized a UV super black and fast-resistant ink that is very suitable for printing on the surface of the card, which further improves the performance of the product. This UV environmentally friendly ink can be printed on cards with dirty surfaces or small scratches. It can be wiped with solvents such as alcohol and propanol. At the same time, it can be cured with less UV energy, reducing energy consumption.
UV inkjet coder, Color inkjet coding machine, online color inkjet printer
Wuhan HAE Technology Co., Ltd. , https://www.whinkjetcodingmachine.com