First, the causes of cavitation Cavitation is caused by the liquid vaporization, the liquid molecules escape the liquid surface, a process of gas molecules, known as "vaporization." The degree of vaporization of liquid pressure and the size of the high and low temperature. Dissolved in the liquid gas, pressure and temperature changes will be released, the formation of cavitation. When the internal pressure of the liquid drops below the saturated vapor pressure of the liquid at the temperature, bubbles or cavitation are formed in the local area. When the pressure rises, the bubble is suddenly crushed by the pressure around it, Extruded to the center of the bubble at an extremely high rate, causing a hydraulic shock to the equipment. The entire process of microbubble generation, rupture and physical and chemical effects on the overcurrent surface is called cavitation. If the liquid does not contain any impurities, cavitation does not occur even under low pressure. Foreign cavitation researchers believe that the tensile strength of ultra-pure water (ie, the limit for generating holes) far exceeds the tensile strength of conventional metal materials. However, the usual liquid always contains gas or solid, these impurities become corrosive nuclei, under certain conditions to induce the occurrence of holes. Due to the different proportion of water and sand, the movement path of sand and streamline may speed up the occurrence of cavitation. Optical Grade Polycarbonate Sheet
Optical Grade Sheet,Optical Grade Plastic Sheet,Optical Grade Clear Plastic Sheet,Optical Grade Polycarbonate Sheet Suzhou Demine Plastic Co.,Ltd , https://www.demineplastics.com
Why pump cavitation occurs?
ã€Print】 ã€Close】
Material: imported polycarbonate board
Raw materials: Bayer, Bayer, Germany, SABIC, USA
Thickness: 0.8mm/1mm/2mm/3mm, etc. (thickness can be customized)
Introduction: the surface texture is square and inverted vertebrae, and the structure is consistent. The average beam angle is 80 degrees, which can help improve the light efficiency of lamps and reasonably restrain the brightness of lamps; each C-plane can reduce glare, especially suitable for educational lighting and other products with UGR < 19.
Application fields: mainly used in panel lights, suitable for indoor, school, office, library and office lighting areas, such as LED eye protection classroom lights, blackboard lights, library lights, etc;
performance
Weather resistance: imported raw materials, raw materials with anti UV particles, can effectively prevent yellow edge, atomization, poor light transmission and other phenomena. UV coating can also be noted.
Sound insulation performance: it has good sound insulation performance. Under the condition of the same thickness, the sound insulation capacity of PC board is 3-4db higher than that of glass, which is the preferred material for highway sound barrier.
Flame retardant: PC endurance board itself does not self ignite and has self extinguishing property. According to the national standard GB8624-2006, it belongs to flame-retardant Class B1. It will not produce toxic gas when burning, and will not promote the spread of fire. High requirements can be customized PC flame retardant VO board.
Temperature resistance: from - 40 ℃ to 120 ℃, there will be no deformation, obvious changes in mechanical and mechanical properties and other quality deterioration;
Portability: light weight, the density of endurance plate is only half of that of ordinary glass, thus saving the cost of transportation, handling, installation and supporting frame.