Tim Olk photo Tim Olk photo Tim Olk photo Tim Olk photo Hot air enters the stirring part of drying chamber from the bottom, material is stirred by stirring device and then the hot air exerts strong shearing, blowing, floating and rotating effect to material. Therefore material is crushed by centrifugal, shearing, impacting and friction effect. It strengthens the heat exchanging process. In the bottom of drying chamber, big and damp granules are crushed by stirring device, the particles with low moisture content and small size are lifted by rotary air stream, and be further dried. Gas and solid two phases rotary flow, inertia of solid phase is bigger than gas phase, the relative velocity between gas phase and solid phase is high, heat exchanging efficiency is strengthened, so the drying intensity of this machine is high. Spin Flash Dryer,Rotary Flash Dryer,Flash Dryer,Starch Flash Dryer Changzhou Bole Tech Co.,Ltd , https://www.boledrying.com
CFD Working Fire 8027 S.indiana, 12-20-13
More from Tim Olk at a working fire in Chicago on Friday afternoon at 8027 S. Indiana. The scene was intense as firefighters worked quickly to contain the blaze. Here are some of the moments captured by Tim during the incident.
These images give a glimpse into the hard work and dedication of the firefighters on the scene. The community was on edge, and it's clear that the team worked tirelessly to ensure safety and control the situation. Stay tuned for more updates as the investigation continues.
Next Article
New Lenox FPD news
Prev Article
2-11 Alarm fire in Chicago, 12/30/16 (more)